Advertisement
7.0
7.1 General Requirements
Make sure to plug the charging connector back into the correct plug holder after charging
and let the charging cable hangs freely. Check the charging station and the charging cable
regularly. You can contact customer service for replacement or maintenance if you notice
any damage.
・NZS is powder coated. This coating must be kept in good condition;
・We suggest that NZS must be cleaned twice a year (adjusted to the current situation);
・Remove coarse dirt by spraying with low pressure line water instead of high-pressure jet;
・Apply a neutral or weak alkaline cleaning solution and let it soak;
・Use only cleaning agents with a PH between 6 and 8;
・Do not use cleaning agents with abrasive ingredients;
・Do not use abrasive tools;
・Remove dirt with a hand pad made of nylon fleece;
・Check the coating regularly for damage;
・Call customer service if coating damage occurs.
Please always wear appropriate personal protective equipment when performing any oper-
ations, repairs, maintenance and other activities in the ESS field. The following personal
protective equipment is considered a minimum requirement.
・Safety boots with non-perforated soles and steel toes
・Tight fitting flame-retardant coveralls
・Appropriate flame-retardant work pants
・Individually fitted hearing protection
・Safety gloves
・Any other prescribed protective equipment must also be used.
44
Copyright | NZS Installation and Operation Manual
/ Maintenance
Advertisement
