Brother DCP-L5510DN Quick Setup Manual

D0277N001-00
USA/CAN
Version 0
EN
Unpack the machine and check the components
Toner Cartridge and Drum Unit
1
Remove the packing materials and re-install the toner cartridge and drum unit assembly
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
NOTE:
Before connecting the power cord,
locate the Serial Number label on
the back or side of the machine.
Record this number for Registration
and Warranty support.
Back
Quick Setup Guide
DCP-L5510DN / MFC-L5710DN / MFC-L5710DW / MFC-L5715DW / MFC-L5717DW /
MFC-L5915DW / MFC-L6810DW / MFC-L6915DW / MFC-EX915DW
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Not all models are available in all countries.
Video setup instructions:
support.brother.com/videos
Assembly
(Installed in the machine)
Quick Setup Guide
Discard the
silica gel pack.
Adjust the paper
guides.
NOTE:
• Manuals in Spanish for this model are available at
AC Power Cord
• The components included in the box may differ depending on your
• The available connection interfaces vary depending on the model.
USB Port Cover
(Not included in all models)
Product Safety Guide
• The screens and images in this Quick Setup Guide show the
Do not exceed this mark.
4
1.
2.
3.
* If your machine displays the [All Settings] menu on
Front
The latest manuals are available at the Brother support website:
support.brother.com/manuals
support.brother.com.
Manuales en Español para este modelo están disponibles en
support.brother.com.
country.
You must purchase the correct interface cable if you require one.
• USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 6 feet (2 meters) long.
• Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable.
MFC-L6915DW.
Remove the orange part.
Select your language (if needed)
On the machine's touchscreen,
press [Settings]* >
[All Settings] >
[Initial Setup] >
[Local Language].
Press your language.
Press .
the Home screen, start from [All Settings].