Table of Contents
Advertisement
A
Adjusting beam throw
L
Note:
When the basic setting is cor-
rect, headlight beam throw is
regulated when spring preload
is adjusted to suit load.
Have the headlight basic set-
ting adjusted by a specialist
workshop, preferably an
authorised BMW motorcycle
dealer.
L
Note:
Adjust beam height so that
oncoming traffic is not dazzled.
Make sure that the throw of the
light cone adequately illumi-
nates the road ahead of you.
1
B
Adjusting to suit load
Change the spring strut setting
to suit the load ( (
– Spring preload has an effect
on headlight throw
Only if the load carried on the
motorcycle is very high, the
headlight beam can also be
lowered by moving pivot
lever 1. This shortens the beam
throw.
Pivot lever 1:
A = neutral position
B = high load
Lights
41)
b
2
2
37
Advertisement
Table of Contents
