End Time - Beko CM 8120 BMG User Manual

bol appears on the display. When this warn-
ing is displayed, you can release the Auxiliary
Function button 3.
To deactivate the child lock:
Press and hold Auxiliary Function button 3
for 3 seconds. After the countdown as
"3-2-1" on the display is over, child lock
symbol disappears.
• Bluetooth
You can use the bluetooth connection func-
tion to pair your machine with your smart
device. This way, you can use your smart
device to get information about your ma-
chine and control it.
To activate bluetooth connection:
Press the Remote Control function button for
3 seconds. "3-2-1 countdown will be dis-
played and Bluetooth symbol will appear on
the display. Release the Remote Control
function button. Bluetooth icon will flash
when the product is pairing with your smart
appliance. The icon's light remains on if the
connection is successful.
For deactivating the Bluetooth
connection:
Press the Remote Control function button for
3 seconds. Countdown "3-2-1" will be dis-
played, and then Bluetooth icon will disap-
pears on the display.
First setup of the HomeWhiz applic-
ation must be complete for the
bluetooth connection to be activ-
ated. After setup, pressing the re-
mote control function button while
the knob is at Download Pro-
gramme/Remote Control position
will automatically activate the
bluetooth connection.

6.9 End Time

Time display
When the end time function is selected, the
time remaining until the start of the pro-
gramme is displayed in hours as 1h, 2h; and
after the start of the programme, the time re-
maining to the end of the programme is dis-
played in hours and minutes as 01:30 for an
example.
Programme duration may differ from
the values in section "Programme
and consumption table" depending
on the water pressure, water hard-
ness and temperature, ambient tem-
perature, amount and the type of
laundry, auxiliary functions selected
and the changes at the mains
voltage.
With the End Time function, the end time of
the programme may be adjusted up to 24
hours. After pressing End Time button, the
programme's estimated ending time is dis-
played. If the End Time is set, End Time in-
dicator is illuminated.
In order for the End Time function is activ-
ated and the programme is completed at the
end of the specified time, you must press
Start/Pause button after adjusting the time.
If you want to cancel End Time function, turn
the knob to on and off position. machine.
When you have activated the End
Time function, do not add liquid de-
tergent in the powder detergent
compartment no 2. There is the risk
of staining of the clothes
a. Open the loading door, place the laundry
and put detergent, etc.
EN / 28