End Time - Beko WTIK94121F User Manual

To enable Wi-Fi:
Press and hold the remote control button
for 3 seconds. The display shows the "on"
symbol after the countdown "3-2-1". When
this warning appears, release the remote
control button. The wireless icon blinks
when the product connects to the Internet.
When the connection is successful, the
icon's light remains on.
To disable Wi-Fi:
Press and hold the remote control button
for 3 seconds. The countdown "3-2-1" ap-
pears on the display and the symbol "off"
appears on the display.
Before you can enable Wi-Fi, the ini-
tial setup of the machine with the
HomeWhiz app must be completed.
If you press the "Remote Control"
button after the installation, the
wireless connection will be activ-
ated automatically.

6.9 End Time

Time display
When the end time function is selected, the
remaining time until the programme starts
is shown in hours such as 1h, 2h, and the
remaining time to complete the programme
after your programme starts is shown in
hours and minutes as in the 01:30 example.
Programme duration may differ
from the values in section "Pro-
gramme and consumption table"
depending on the water pressure,
water hardness and temperature,
ambient temperature, amount and
the type of laundry, auxiliary func-
tions selected and the changes at
the mains voltage.
After a certain period when the end
time function is activated, the ma-
chine switches to stand-by mode
and some LEDs on the display are
turned off. LEDs are illuminated in
case of any user entry.
With the End Time function, the end time of
the programme may be set up to 24 hours.
After pressing End Time button, the pro-
gramme's estimated ending time is dis-
played. If the End Time is set, End Time in-
dicator is illuminated.
In order for the End Time function is activ-
ated and the programme is completed at
the end of the specified time, you must
press Start/Pause button after adjusting
the time.
If you want to cancel End Time function,
press On/Off button to turn off and on the
machine.
When you have activated the End
Time function, do not add liquid de-
tergent in the powder detergent
compartment no 2. There is the risk
of staining of the clothes
1. Open the loading door, place the laundry
and put detergent, etc.
2. Select the washing programme, temper-
ature, spin speed and, if required, the
auxiliary functions.
3. Set the End Time of your choice by
pressing the End Time button. End Time
indicator lights.
4. Press Start / Pause. Time countdown
starts.
EN / 31