Functions/Programmes Selec - Beko CM 8120 BMG User Manual

up to 4 auxiliary rinsing steps to the pro-
gramme. You can select and use some aux-
iliary functions even though they are not
found on your product. You can increase
and decrease the duration of the Cottons
and Synthetics programmes within a safe
range.
When the Programme Personalisa-
tion auxiliary function is selected, the
washing performance and energy
consumption will be different than
the declared value.
6.8.2 Functions/Programmes
Selected by Pressing the
Function Keys for 3
Seconds
• Drum Cleaning
Press and hold Auxiliary Function button 1
for 3 seconds to select the programme.
Regularly clean (once every 1 to 2 months)
the drum for ensuring the required hygiene.
Steam is applied before the programme to
soften the residues in the drum. Turn on the
programme when the machine is completely
empty. For more effective results, place
powder anti-limescale (drum cleaning materi-
als) suitable for washing machines inside the
detergent "2". Leave the loading door half
closed after the programme ends for the in-
side of the machine to dry.
This is not a washing programme.
This is a maintenance programme.
Do not turn this programme on
when there is something inside the
machine. When you attempt to op-
erate, the machine automatically
senses that there is load inside, and
may quit or resume the programme
as per the model of your machine.
An effective cleaning is not achieved
if the programme is resumed.
• Anti-Crease+
This function is selected when the spin se-
lection button is pressed and held for 3
seconds and the programme follow-up light
for the relevant step turns on. When the
function is selected, the drum rotates for up
to 8 hours for preventing the laundry from
creasing at the end of the programme. You
can cancel the programme and take your
laundry out at any time during the 8-hour
duration. Press the function selection key or
the machine on/off key to cancel the func-
tion. The programme follow-up light will re-
main on until the function is cancelled or the
step is complete. If the function is not can-
celled, it will be active in the subsequent
washing cycles as well.
• Soaking
This function can be selected by pressing
and holding the auxiliary function button 2 for
3 seconds.
Soaking function allows stains that have
penetrated the laundry are cleaned better by
keeping the laundry in detergent water be-
fore the washing operation is started.
• Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus you
can avoid any changes in a running pro-
gramme.
You can switch on and off the ma-
chine with On / Off button when the
Child Lock is active. When you
switch on the machine again, pro-
gramme will resume.
When the Child Lock is enabled, an
audio warning will be given if the
buttons are pressed. Audio warning
will be cancelled if the buttons are
pressed five times consecutively.
To activate the child lock:
Press and hold Auxiliary Function button 3
for 3 seconds. After the countdown "CL
3-2-1" on the display is over, „CL On" sym-
EN / 27