Summary of Contents for Happybeds Wilton 6FT 4 Drawer Storage Bed
Page 1
Assembly Instructions Title of Product Wilton 6FT 4 Drawer Storage Bed Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
Page 2
Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
Page 3
Please check all hardware matches the list below. Should you notice any are missing please contact your retailer. Already inserted into Head & Foot Ends M8x30mm +Spring Washer M5x70mm +Flat Washer M8x20mm M8x45mm +Spring Washer +Flat Washer M5x50mm +Flat Washer M8x25mm +Spring Washer 30x60...
Page 4
(2x) (2x) 07 (48x) Please ensure you carefully check all the pieces, should you have any concerns please contact the retailer before assembly commences. Please have your order number, details of the issue, the product code, and the batch number from the cartons as this will help us to resolve your issue much faster.
Page 6
Please note that the Bolt (A) x 12 are prefixed into parts 1 & 2...
Page 7
ARROWS ON LABELS POINT TO EACH OTHER 01 02...
Page 9
Drawer Assembly Important: Make sure when you fit the nuts that the hole is in the correct alignment. (Large) x2 Part 13 x 2 Positions For Castors FOLLOW LINE ON BACK OF DRAWER FACE PANEL...
Page 10
Important: Make sure when you fit the nuts that the hole is in the correct Drawer Assembly alignment. (Small) x2 Part 13 x 3 Positions For Castors FOLLOW LINE ON BACK OF DRAWER FACE PANEL...
If this is not adhered to, it could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...