Vivotek FD816B-H User Manual page 56

VIVOTEK
Auto: If you set Exposure mode as Auto, the Exposure time and Gain control will not be
configurable since the sensor library will automatically adjust the value according to the ambient
light. Then you can configure iris mode as "indoor" or "outdoor" to reach the best image quality.
■ Iris mode: Select Indoor or Outdoor iris mode to adapt to the installation. The preset iris aperture
setting will apply. Note that on a fixed lens model, this option is not configurable.
You can click Restore to recall the original settings without incorporating the changes. When
completed with the settings on this page, click Save to enable the settings.
If you want to configure another sensor setting for day/night/schedule mode, please click Profile to
open the Profile of exposure settings page as shown below.
Activated period: Select the mode this profile to apply to: Day mode, Night mode, or Schedule
mode. Please manually enter a range of time if you choose Schedule mode. Then click Save for the
configuration to take effect.
Please follow the steps below to set up a profile:
1. Select the Profile mode tab.
2. Select the applicable mode: Night mode or
Schedule mode. Please manually enter a
range of time if you choose Schedule mode.
3. Configure Exposure control settings in the
folowing columns. Please refer to previous
dicussions for detailed information.
4. Click Save to enable the setting and click
Close to exit the page.
56 - User's Manual