Vivotek FD816B-H User Manual page 231

resolutionC2P
resolutionC1R
resolutionC4R
resolutionW1P
resolutionW1R
resolutionW4R
Group: capability_videoin_c<0~(n-1)>_mode<0~(m-1)> n denotes the value of "capability_nvideoin", m
denotes the value of "capability_videoin_c<n>_nmode"
PARAMETER
rotation
effectivepixel
outputsize
A list of <WxH> 0/7
A list of <WxH> 0/7
A list of <WxH> 0/7
A list of <WxH> 0/7
A list of <WxH> 0/7
A list of <WxH> 0/7
VALUE SECURITY
(get/set)
<boolean> 0/7
<WxH> 0/7
<WxH> 0/7
Available resolutions of 2P mode of ceiling and
floor mount.
Available resolutions of 1R mode of ceiling and
floor mount.
Available resolutions of 4R mode of ceiling and
floor mount.
Available resolutions of 1P mode of wall mount.
Available resolutions of 1R mode of wall mount.
Available resolutions of 4R mode of wall mount.
DESCRIPTION
Indicate this mode whether support video
rotation
The visible area of full scene in this video mode.
The unit is pixel in source.
* This value must <=
"capability_videoin_c<n>_maxsize"
* If
"effectivepixel"<"capability_videoin_c<n>_max
size", then the visible area is located at the
center of full scene.
The output size of source, equal to the captured
size by device, in this video mode. The unit is
pixel.
This value is used as a basic coordinate system
for many features, like ePTZ, privacy mask,
motion, etc.
* Source (most for image sensor) may perform
scale or binning, etc on image data, and output
data with smaller size. This parameter is
designed to represent this.
VIVOTEK
User's Manual - 231