Table of Contents
Advertisement
SECTION 4: CONTROL PANEL
1
1- Detergent drawer
2- Program knob
3- Program end light
4- Function indicator lights
5- Start/pause light
START/PAUSE BUTTON
Used to start a selected program or pause during running.
WARNING!
It is required for the program knob to be brought to O(off)
position before selecting the program or changing a continuing
program.
FUNCTION INDICATOR LIGHTS
When the start/pause button or any function button is pressed, the
corresponding light turns on. The light turns off when the function
button or start/pause button is re-pressed, or when the process
the selected function is completed.
The function indicator lights are also used in failure detection system
mentioned in section 9.
FUNCTION BUTTONS
Rinse hold
This function is recommended to be used when the clothes cannot
be taken immediately after the end of the program. This will
prevent occurrence of wrinkles. When this button is pressed, the
last rinsing water is not drained. For the program to continue from
the same point, repress the same button.
Swan Helpline No. 0845 610 4118
2
3
9
6
6- Program ready light
7- Function buttons
8- Start/pause button
9- Spin speed selector
8
4
5
7
8
Advertisement
Table of Contents
