Table of Contents
Advertisement
If you do not use your machine for a long time, unplug, turn off the
water supply and leave the door open in order to prevent the
formation of unpleasant odours.
As a result of the quality control procedures, a certain amount of
water may remain in your machine. This is not harmful for your
machine.
SECTION 2: INSTALLATION
Thank you for purchasing this swan washing machine. Please read
the instructions carefully before use.
REMOVAL OF TRANSPORTATION SCREWS
Transportation screws, which are located at the back of the
machine, must be removed before running the machine.
(DIAGRAM-1)
Loosen the screws by rotating counter clockwise by a suitable
wrench. (DIAGRAM-2)
Remove the screws by pulling them. (DIAGRAM-3)
Insert the plastic transport screw caps found in the accessories bag,
into the holes. (DIAGRAM-4)
The transportation screws, that have been removed from the machine
should be kept in a safe place, and be reinserted if the item is moved
at any time in the future.
DIAGRAM-1
ENSURE THE WASHING MACHINE IS LEVEL
Do not install your machine on rugs or similar surfaces.
For your machine to work silently and without any vibration, it should
be settled on a flat, non-slippery and tough surface.
Swan Helpline No. 0845 610 4118
DIAGRAM-2
DIAGRAM-3
3
DIAGRAM-4
Advertisement
Table of Contents
