Table of Contents
Advertisement
5. The program ready light will be on.
6. Run the program by pressing the start/pause button.
7. Unplug your machine when the program is over (program end light is
on).
The remaining water inside the machine will be drained and thus formation of
ice in the machine will be prevented. When you operate your machine again,
be sure that the ambient temperature is above 0C.
THE DRUM
Do not leave metal parts like needles, staples or coins inside your machine.
These pieces cause formation of rust stains in the drum.
Swan Helpline No. 0845 610 4118
21
Advertisement
Table of Contents
