Pump Filter - Swann SW2050W User Instructions

PUMP FILTER

! WARNING - The water inside the pump maybe hot, wait for it to cool
before performing this task.
The filter system prevents lint from entering pump this will increase the pumps
lifespan. It is recommended that the filter is checked and cleaned every
month. To clean your pump filter:
1. Open the filter cover (Located in the bottom, front, right-hand corner)
by pulling the handle (Diagram 2-A).
2. Before opening the filter place a cup in front of the filter to collect
residual water that may leak from the machine.
3. Loosen the filter cover by rotating it counter clockwise and drain the
water (Diagram 4-A)
4. Remove the foreign materials from the filter. We recommend you
flush the filter clean with running water.
5. Check for the rotation of the pump manually.
6. After you have cleaned the pump, fit the filter by rotating clockwise.
7. Replace the cover.
! If you do not fit in the filter cover properly, it will leak water
Swan Helpline No. 0845 610 4118
5-A
19