Section 8: Trouble Shooting - Swann SW2050W User Instructions

SECTION 8: TROUBLE SHOOTING

FAILURE
Your machine does not
operate.
Your machine does not
receive water.
Your machine is not
draining water.
Your machine is
vibrating.
(*)See section 7:maintenance and cleaning.
(**)See section 2:installation.
Swan Helpline No. 0845 610 4118
PROBABLE CAUSE
It is unplugged.
Your fuse is defective.
The power is off.
Start/pause button has
not been pressed.
The program knob is
set to off status.
The door is not shut
properly.
Water tap is closed.
The water inlet hose
may be bent.
The water inlet hose is
obstructed.
The valve inlet filter is
obstructed.
The door is not shut
properly.
The drain hose is
obstructed or bent.
The filter is obstructed.
The clothes are not
placed inside the
machine in a well-
balanced manner.
The machine is not
level.
Transportation screws
are not removed.
22
SOLUTION
Insert the plug into the
socket.
Change your fuse.
Check the power in
household.
Press the start/pause
button.
Rotate the program
knob to the desired
program.
Shut the door properly.
You should hear a
click.
Open water tap.
Check the water inlet
hose.
Clean the filters of
water inlet hose. (*)
Clean the valve inlet
filters. (*)
Shut the door properly.
You should hear the
click.
Check the drain hose.
Clean the filter. (*)
Spread the clothes
inside the machine in
an orderly and well-
balanced manner.
Adjust the feet. (**)
Remove transportation
screws. (**)