Table of Contents
Advertisement
Sound Setting
Allows you to select an audio-enhancement technique.
1. Press the MENU button to display the main menu. Press the
to select the SOUND menu and then press the
button.
2. Press the
buttons to select the following options, and then press
buttons to adjust each option's setting or the OK button to select the
options.
Sound Mode
You can select this function when DTS TruSurround switch off. It allows the selection of an audio-
enhancement technique: Standard / Movie / Music / Personal.
Alternative
You may press the SMODE button to select the sound mode directly.
Treble
Controls the relative intensity of higher pitched sounds. (for Personal mode)
Bass
Controls the relative intensity of lower-pitched sounds. (for Personal mode)
Balance
Adjusts the relative volume of the speakers in a multiple speaker system.
AVL (Auto
Activates the auto volume leveller to keep the volume level consistent whenever you change
Volume Limiting)
channels if selecting On.
The volume level may not be consistent due to different signal conditions of broadcasting
stations if selecting Off.
DTS
DTS TruSurround delivers an immersive virtual surround sound experience over front facing
TruSurround
speaker configurations, complete with rich bass, high frequency detail and clear dialogue. Press
the OK button to select On / Off.
Digital Audio
Selects the digital audio output mode: PCM / Auto / Off.
Output
Audio
This will only work if the programme you are watching broadcasts the audio description. You
Description
will hear a description of what is happening on screen, it is designed for people with a visual
(DTV mode only)
impairment.
1. Press the
sub-menu.
2. Press the
3. Press to
audio description.
Sound Type
Select the sound type: Stereo / Dual I / Dual II / Mixed.
(DTV mode only)
4. Press the MENU button to return to the previous menu, press again to
return to the main menu.
5. Press the EXIT button to exit the menu.
Stereo / Dual Sound Reception (ATV Mode)
When a programme is selected, press the AD button to display the sound information for the selected station.
Broadcast
Mono
Stereo
MONO / NICAM DUAL I, NICAM DUAL II, NICAM DUAL I+II
Dual
button or the OK
button to highlight Audio Description, then press the OK button to enter the
buttons to switch the Mode to On.
button to select Volume, then press the
On Screen Display
MONO / NICAM MONO
MONO / NICAM STEREO
buttons
Sound Mode
Treble
Bass
Balance
AVC
DTS TruSurround
Digital Audio Output
Audio Description
Move
Adjust
buttons to adjust the volume of the
Sound
Standard
0
0
0
On
On
PCM
MENU: Return EXIT: Exit
GB
23
Advertisement
Table of Contents
