Hdmi Cec Control - Logik L32HE15 Instruction Manual

Auto Standby
The unit will automatically switch to standby mode 4 hours after the last time the remote control
was used. A reminder screen will pop up and count down before the unit switches to standby
mode.
If you want to operate the TV for a long period of time, turn off the auto standby function.
To save energy you should always turn the auto standby function back to "3 hours", "4 hours" or
"5 hours".
Time Zone
When you select a Time Zone city, the TV time is set by the time offset information based on Time
Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is
set automatically by a digital signal.
Time
Allows to set the time and date manually or set
automatically when receiving a digital signal.
Press the
press the OK button or the
sub-menu.
Selects Auto Sync to On, the time and date will
be set from the broadcast signal.
If you want to set the time and date manually,
set Auto Sync to OFF. Then press the
buttons to highlight the Date and Time options
and press the 0-9 buttons or the
set the date and time.
4. Press the MENU button to return to the previous menu, press again to
return to the main menu.
5. Press the EXIT button to exit the menu.

HDMI CEC Control

Allows you to command and control two or more HDMI CEC (Consumer Electronics Control) compliant devices, that are
connected through HDMI, by using only one of the remote controls (e.g. controlling a TV set, set-top box and DVD player using
only the remote control of the TV). HDMI CEC also allows individual HDMI CEC compliant devices to command and control each
other without user intervention.
Make sure that your HDMI CEC-compliant device is connected to your TV using a HDMI cable and the correct HDMI input source
is selected prior to using this function. (Some HDMI cables may not support HDMI-CEC functions.)
HDMI-CEC Connection
1. Press the MENU button to display the main menu. Press the
to select the Setup and then press the
buttons to highlight TIME, then
button to enter the
buttons to
HDMI Cable
(not included)
TV
button or the OK button.
Time
Auto Sync
Date
Time
Move Adjust
HDMI CEC compliant device
buttons
OSD Language
Audio Language
Subtitle
Teletext
Blue Screen
Mode Setting
Time Settings
HDMI CEC Control
Move
On
03 Apr 2015
01:53:42
MENU: Return EXIT: Exit
Setup
English
On
Home Mode
MENU: Return EXIT: Exit
GB
41