Polycom VVX150 Startup Manual page 2

Your quick start guide
1
2
3
4 5
Installing Your DECT Phone
The box for your handset will contain a number of items:
• The main phone chassis
• A plastic 'foot' which should be attached to the base of the chassis
• A handset receiver
• A curly wire to attach the receiver to the main chassis
• An RJ45 Ethernet cable to connect the handset to your local network
If you have ordered a power supply unit (PSU) then this will be provided separately. Note that the phone does not need a PSU if your
network supports power over Ethernet (POE).
The phone has a second Ethernet port which can be used to attach another device (e.g. your PC) to the same network port in your office.
The phone also supports the use of a headset which should be attached using an RJ9 square type connecting cable to the appropriate
socket on the rear of the chassis.
Once the handset is powered and connected to your network it should boot up ready for use, with the correct extension number, date
and time displayed on the screen. In the event that the handset does not boot up correctly then please contact our Support team.
7 6 8
1 Line Keys
2 Reversible Tab
17
3 Speaker
16
4 Back Key
5 Transfer Key
15
6 Hold Key
14
7 Volume Keys
13
8 Dial Pad
12
9 Mute Key
10 Speakerphone Key
11 Headset Key
12 Home Key
10
13 Navigation keys / Select Key
14 Soft Keys
15 Security slot (on back)
16 Screen
17 Message Waiting Indicator
9