Haier HDW15U2I1 User Manual page 27

NZ AU
Removing and cleaning the filter plate
filter plate
Replacing the filter plate
filter plate
Cleaning the upper spray arm
upper spray arm
Cleaning the middle spray arm
locking nut
middle spray arm
With the filter removed, carefully lift the filter plate
up and out.
Clean under hot water and rinse thoroughly.
Slot the filter plate under the locating clips at the
rear of the drain and push firmly back into place.
Ensure the filter plate is flush with the dishwasher
base.
Do not remove the upper spray arm for cleaning.
Clean with a small, plastic-bristled brush.
If heavily soiled or blocked use a dishwasher cleaner/
descaler. Follow the manufacturer's instructions.
To remove the middle spray arm, turn the locking
nut clockwise to release.
Rinse the spray arm thoroughly under running water,
then refit.
Maintenance
26