Table of Contents
Advertisement
Maintenance
Removing and cleaning the filter
1
filter cap
2
filter base
Replacing the filter
locating
notch
1
locating
notch
2
25
Twist the filter anti-clockwise to release. Lift
to remove.
Separate the filter cap from the base by pressing
the release buttons and lifting.
Do not attempt to remove the filter by force
as this may cause damage.
Clean under hot water and rinse thoroughly.
Align the filter cap with the notch on the
filter base. Ensure that the buckle structure
is in place.
Place the drain filter back into the dishwasher
base. Rotate 2 clockwise to click into place.
NZ AU
Advertisement
Table of Contents
