Lpg Cylinder Installation; Where Does The Lpg Cylinder Go; Requirements For Installation; Installation On Ground - Weber SPIRIT EO-210 CLASSIC Owner's Manual

Table of Contents

Advertisement

WHERE DOES THE LPG
CYLINDER GO?
The cylinder must be placed
on the ground, towards the
rear, right-hand side of the
grill.
m DANGER
Do not store an extra (spare) or
disconnected gas supply cylinder under or
near this grill.

REQUIREMENTS FOR INSTALLATION

The maximum cylinder capacity is 13kg. The cylinder
must be placed on the ground towards the rear, right-
hand side of the grill. Do not attempt to install a cylinder
inside the cabinet.

INSTALLATION ON GROUND

A) Pass the hose and regulator out through the right
frame panel opening (1).
B) Place the cylinder on the ground, outside the cabinet,
on the right side of the grill.
C) Turn the LPG cylinder so the opening of the valve is
facing forwards.
D) Connect the regulator to the cylinder. Refer to
"CONNECTING THE REGULATOR".
8
WWW.WEBER.COM

LPG CYLINDER INSTALLATION

1

Advertisement

Table of Contents
loading

Table of Contents