Table of Contents
Advertisement
Quick Links
BUILT-IN GAS BARBECUE
E-360 • S-360
E-460 • S-460
Installation Guide
REGISTER TODAY
We are so glad that you have joined us on the journey to barbecuing greatness.
Register your barbecue and gain access to fun and engaging WEBER information,
including tips, tricks and how to get the most out of your barbecuing experience.
Keep this Owner's Manual for future reference, thoroughly read through it, and
if you have any questions please contact us today.
NG
30764
041223
enAU, enNZ
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Weber Genesis E-360
Summary of Contents for Weber Genesis E-360
- Page 1 We are so glad that you have joined us on the journey to barbecuing greatness. Register your barbecue and gain access to fun and engaging WEBER information, including tips, tricks and how to get the most out of your barbecuing experience.
-
Page 2: Important Safety Information
Important Installation and Assembly Storage and/or Nonuse DANGER: This barbecue is not intended to be WARNING: After a period of storage and/or nonuse, Safety Information installed in or on recreational vehicles or boats. the barbecue should be checked for gas leaks and burner obstructions before use. -
Page 3: Considerations For Locating Your Barbecue
Considerations for Locating your Barbecue Any enclosure in which the appliance is used shall comply with one of the following: • An enclosure with walls on all sides, but at least one permanent opening at ground level and no overhead cover (A). •... -
Page 4: Configuration Options
Configuration Options “ISLAND” STRUCTURE CONFIGURATION OPTIONS Recommended Gas Supply Locations There are several configuration options for the grill and gas supply access of your Island structure. The 3 common options (A, B, C) are illustrated in the ‘Island’ Structure Configuration Options” table. If there are local codes that apply to “built-in”... -
Page 5: General Construction
General Construction The GENESIS Built-In unit should be on site before construction begins. For ease of installation, the barbecue will be pushed on its casters into the built-in structure. The installation of this barbecue requires a level floor pad surface (1) and countertop surface. The floor pad surface must be constructed from solid materials and must be level and smooth. -
Page 6: Clearances From Combustible Materials
Positioning Your Barbecue CLEARANCES FROM COMBUSTIBLE MATERIALS When determining a suitable location for your barbecue installation, give thought to concerns such as exposure to wind, proximity to traffic paths, and keeping any gas supply lines as short as possible. Never locate the barbecue in a garage, breezeway, or shed, under an unprotected overhang, or in any other enclosed area. - Page 7 • The dust cover (plastic plug supplied with your gas supply hose and the male bayonet fitting) helps keep This WEBER built-in gas barbecue is not intended for the open end of the male bayonet fitting clean while commercial use.
- Page 8 BUILT-IN CUTOUT DETAILED DIMENSIONS - LOCATING THE STRUCTURE NEAR A COMBUSTIBLE WALL 24" (610 mm) minimum* 24" (610 mm) minimum* Minimum from cutout edge to combustible construction. Minimum from cutout edge to combustible construction. 0" (0 mm) minimum** 0" (0 mm) minimum** 12"...
- Page 9 BUILT-IN CUTOUT DETAILED DIMENSIONS - LOCATING THE STRUCTURE NEAR A NONCOMBUSTIBLE WALL 24" (610 mm) minimum* 24" (610 mm) minimum* Minimum from cutout edge to combustible construction. Minimum from cutout edge to combustible construction. 0" (0 mm) minimum 0" (0 mm) minimum 12"...
Need help?
Do you have a question about the Genesis E-360 and is the answer not in the manual?
Questions and answers