Weber SPIRIT EO-210 CLASSIC Owner's Manual page 21

BURNER TUBE CLEANING
OR REPLACEMENT (continued)
Reinstall Burner Tubes
A) Put burner tube 2 inside cookbox and pass the front
end of tube out through burner tube 2 opening. Note:
Single row of burner ports should be facing up. Slide
burner tube 2 under the guide screw and washer (1).
B) Put burner tube 1 inside cookbox and pass igniter
wires and the front end of tube out through burner
tube 1 opening (2).
C) While holding burner tube 1, insert left side of
Crossover tube into Crossover burner hole (3). Guide
right side of Crossover tube into Crossover burner hole
in burner tube 2 (not pictured). Note: The Crossover tube
burner ports should face the front of the cookbox.
D) Slide burner tube 1 under the guide screw and
washer (4).
ANNUAL MAINTENANCE
1
2
3
4
21
WWW.WEBER.COM