Sherwood Scuba OASIS BLIZZARD SECOND STAGE Service Manual page 2

Table of Contents

Advertisement

INTRODUCTION
The instructions set forth in this document are intended to guide the experienced scuba equipment repair technician
through the standard service procedure for this Sherwood regulator.
It is assumed that the technician possesses basic scuba equipment repair training, proper tools and the skill
necessary to perform the service. If you have not received regulator service training provided by Sherwood Scuba
specifically for this equipment, do not attempt to perform the service described in this document.
Service parts for Sherwood equipment are sold only to Authorized Sherwood Dealers.
Before attempting to perform service read this manual in its entirety. There are warnings and cautions contained in
the manual that may affect your safety or the safety of the regulator user.
If you are uncertain as to whether you are qualified to perform this service contact your regional Sherwood Scuba
Distributor for technical assistance.
USE OF WARNINGS, CAUTIONS AND NOTES
WARNING:
CAUTION:
NOTE:
REGISTRATION, INSPECTIONS AND SERVICES ON-LINE REGISTRY.
All Sherwood regulators have to be registered right after purchase, either by the end consumer or the dive center
where the item was acquired. If the dive center is not capable to register the product for the end-consumer at the
time of purchase, the sales associate form the dive center has to strongly encourage the end-consumer to register the
product as soon as possible.
Effective immediately: recording inspections and services is required to ensure the proper continuity of the warranty
process. Regardless of location, proper record keeping by the authorized dealer is required right after each inspec-
tion or service is performed.
When the regulator is going to be used for recreational purposes a year or 150 dives after purchase an inspection is
required; a year after such inspection or when the regulator has completed 300 dives a full service is required. Time
frames may be different when the regulators are going to be used for public service, rental or instructional use. Please
contact your local Sherwood Sales representative for additional information to discuss particular cases and usage.
Website:
Using your dealer credentials at HYPERLINK "http://www.sherwoodscuba.com"www.sherwoodscuba.com locate
the Product Warranty tab and follow the instructions:
WHEN TO SERVICE
This Sherwood regulator should be inspected for service at least annually. In most cases a simple inspection,
and if needed, minimal adjustment not requiring the replacement of parts will be sufficient for continued use.
Guidelines for the Annual Inspection are included in this manual.
www.sherwoodscuba.com
Indicates a potentially hazardous condition or situation which, if not avoided, may
result in serious injury or death.
Indicates a potentially hazardous condition or situation which, if not avoided, may
result in minor injury. It may also be used to alert against unsafe practices.
Indicates an important point or reminder.
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srb 9710Srb 9910

Table of Contents