Advertisement
5. Servicing
5.1
The PAGlink Micro Charger contains advanced electronics that do not
require periodic maintenance; consequently there are no user-
serviceable parts inside.
5.2
WARNING: To avoid the risk of electric shock, do not disassemble the
charger's Power Supply Unit. Refer all servicing or repairs to an
authorised PAG service centre.
Qualified electronics engineers who wish to gain access to internal
assemblies should note that parts of the power circuit retain a high
voltage even after the AC supply has been disconnected. Wait for a
period of five minutes following disconnection before commencing
disassembly, and be aware of charged capacitors.
5.3
Seek advice if the charger is not operating normally or if any of the
following situations occur:
• The charger is correctly connected to the power and the display is
not functioning.
• The charger ceases to operate after entering fail-safe shutdown
mode (allow it to cool before reconnecting to the supply).
• The charger has been damaged or suffered a blow.
• The charger has been exposed to moisture, rain or any other
liquid.
Contact an authorised PAG Service Centre:
Europe & Middle East: Aspectra
Spoorhaven 78, 2651 AV, Berkel en Rodenrijs, The Netherlands
Tel: +31 (10) 5140680, Email: info@aspectra.nl
UK & RoW: PAG Ltd.
Epsom Downs Metro Centre, Units 9 & 10, Waterfield, Tadworth, Surrey, KT20
5LR, United Kingdom
Tel: +44 (0)20 8543 3131, Email: support@paguk.com
The Americas: PAG America (part of the Carr Distribution Group)
18 Center Street, Ramsey, NJ 07446, USA
Tel: +1 631 300 8215 , Email: sales@pagamerica.com
11
Advertisement
