McConnel PA6085 Operator's Manual page 60

th
6 SERVICE (Where applicable)
Default Mode
On machines fitted with a controllable 6
the ◄ ► buttons on the control unit. If required, control of the function can be swapped to
the left hand toggle switch by activating the D1 button on the control panel; in this mode slew
operation will then be transferred to the ◄ ► buttons. De-activating D1 will return the
functions to their default controls. An LED light above the button confirms when the service is
active.
th
7 SERVICE (Where applicable)
Additional services that require ON/OFF control only are operated by the D2 button on the
control panel; pressing the button will switch the service on, pressing the button again will
switch it off. An LED light above the button confirms when the service is active.
Swapped Mode (D1 Activated)
th
service default operation of that function will be via
41