Table of Contents
Advertisement
Fit PTO shaft in position.
Attach torque chains to a convenient location
to prevent rotation of the shaft guards.
Fit machine controls into the cab.
Raise the stand legs and stow into their work
position, secure with locking pins.
On these models the stand legs are stowed in
a storage cavity within the mainframe.
Tighten check chains and/or stabiliser bars.
VFR Models with Security Lock Tap
Where fitted this lock tap must be opened before attempting to operate the machine – refer
to page 27 for further details.
The machine should now be carefully operated throughout its full range of movements to
check hoses are not being strained, pinched, chafed or kinked, and that all movements are
functioning correctly.
The machine can now be folded into the transport position ready to proceed to the work site -
refer to transport section for details on this subject.
19
Advertisement
Table of Contents
