Table of Contents
Advertisement
Replacement
Before replacing the unit
When you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect
z
the power plug from the wall outlet. (
Be sure to observe the procedure "Turning off the projector" (
z
operation.
Maintenance
Outer Case
J
Wipe off dirt and dust using a soft dry cloth.
If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector
z
with a dry cloth.
Do not use benzene, thinner, or rubbing alcohol, other solvents, household cleaners. Using them may
z
cause deterioration of the outer case.
When using chemical treated dusters, follow its instruction.
z
Front glass surface of the lens
J
Wipe off the dirt and dust off the front surface of the lens with soft clean cloth.
Do not use a cloth that has an abrasive surface or a cloth that is moist, oily, or covered with dust.
z
Do not use excessive force when wiping the lens as it is fragile.
z
Attention
The lens is made of glass. Impacts or excessive force when wiping may scratch its surface.
z
Please handle with care.
Replacing the unit
Air filter units
J
Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter become
clogged with dust particles, it will reduce cooling fans' effectiveness and may result in internal heat buildup and
adversely affect the life of the projector.
If the air filter units become clogged, it will result in internal heat buildup, the power of the projector may
be turned off for safety.
If a "Filter warning" icon
Consult your dealer to purchase a replacement air filter unit (ET-RFV200).
78
- ENGLISH
Æ
pages 26, 30)
appears on the screen, replace the filters immediately.
Æ
page 30) when performing power supply
Advertisement
Table of Contents
