Ubiquiti UniFi UVP User Manual page 36

Chapter 6: Camera Screen
White Balance
Use the White Balance setting to adjust the white balance
in videos to be recorded.
1. Press the White Balance icon (the icon's appearance
reflects the current setting).
2. Select one of the following:
- Incandescent Use this setting to take videos under
incandescent lighting.
- Fluorescent Use this setting to take videos under
fluorescent lighting.
A
- Auto (Default) Use this setting to have the camera
determine the settings.
- Daylight Use this setting to take videos in natural
light.
Cloudy
- Use this setting to take videos under
cloudy conditions.
Other Video Settings
To edit other video settings:
1. Press on the screen, then press
2. The following options are displayed:
- Time lapse This option lets you record a time lapse
video clip. To configure the time lapse feature:
a. Press Time lapse.
b. Press OFF (or slide it to the right). The control
changes to ON to confirm that Time lapse is
enabled.
c. Set the time interval seconds, minutes, or hours.
Choose from the following units: 0.5, 1, 1.5, 2, 2.5,
3, 4, 5, 6, 10, 12, 15, 24.
d. Press Done to save the changes.
- Video quality This option lets you select the video
quality. To change it, press the option and select either
HD 720p or SD 480p.
- Store location This option lets you decide whether
the saved video is stored in internal storage or on an
external SD memory card.
32
www.4Gon.co.uk info@4gon.co.uk Tel: (0)0330 088 0295 Fax: +44 (0)1245 808299
.
UniFi® VoIP Phone User Guide
Ubiquiti Networks, Inc.