Progress PVX1556 User Manual page 30

30 Progress
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
empty notification
Make sure the appliance is in user mode.
1. Press .
• The indicators
are off.
• The indicator
• The indicator
setting.
– If the indicator
rinse aid empty notification is
activated.
– If the indicator
rinse aid empty notification is
deactivated.
2. Press to change the setting.
3. Press on/off to confirm and save the
setting.
The rinse aid level
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid
dispenser and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press .
• The indicators
are off.
• The indicator
• The indicator
The number of flashes indicates the
current setting: e.g. 4 flashes +
pause + 4 flashes... = level 4.
, , and
still flashes.
shows the current
is on = the
is off = the
, , and
still flashes.
starts flashing.
– The levels of rinse aid range
from 0 to 6.
– Level 0 means no rinse aid is
used. In this case the
indicator remains off.
2. Press repeatedly to change the
setting. Each pressing of
the level number. After reaching level
6, the count starts again from level 1.
3. Press on/off to confirm the setting.
Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
Make sure the appliance is in user mode.
1. Press
• The indicators
are off.
• The indicator
• The indicator
setting.
– If the indicator
acoustic signal is activated.
– If the indicator
acoustic signal is deactivated.
2. Press to change the setting.
3. Press on/off to confirm the setting.
AirDry
AirDry improves the drying results with
less energy consumption.
increases
, , and
still flashes.
shows the current
is on = the
is off = the