Specifications - Siemens Gigaset E450 User Manual

Specifications

Recommended battery pack
(Valid at the time of going to press)
Nickel-metal-hydride (NiMH):
V30145-K1310-X382
The handset is supplied with the recom-
mended battery pack.
Handset operating times/charging
times
Capacity 620 mAh
Standby time Approx. 160 hours (6 days)
Calling time Approx. 12 hours
Charging time approx. 6 hours
The operating and charging times apply
only when using the recommended bat-
tery pack.
Note:
When the display illumination is switched on,
the standby time of the handset is reduced to
approx. 30 hours.
Base station power consumption
In standby mode: approx. 2 watt
During a call: approx. 3 watt.
General specifications
DECT standard is supported
GAP standard is supported
No. of channels 60 duplex channels
Radio frequency
range 1880–1900 MHz
Duplex method Time multiplex,
10 ms frame length
Channel grid 1728 kHz
Bit rate 1152 kbit/s
Modulation GFSK
Language code 32 kbit/s
Transmission 10 mW, average power per
power channel
Range up to 300 m outdoors,
up to 50 m indoors
Base station
power supply 230 V ~/50 Hz
Environmental +5 °C to +45 °C;
conditions for
20 % to 75 % relative
operation
humidity
Dialling mode DTMF (tone dialling)
Base station 122 x 109 x 73 mm
dimensions
(L x W x H)
Handset 143 x 51 x 25 mm
dimensions
(L × W × H)
Base station
weight 122 g
Weight of handset
with battery pack 133 g
Appendix
45