Table of Contents
Advertisement
Activating the room monitor and
entering the number to be called
¢
¢
v
í
Room Monitor
¤
Change multiple line input:
Room M.:
Select
On
to activate.
Call to:
Press the display key
tination number.
External number: select number from
the directory or enter directly. Only the
last 4 digits are displayed.
Internal number: delete any stored
external number.
set or
, if all registered handsets
Call All
are to be called)
Store number with
Level:
Set noise level sensitivity
¤
Save changes (page 47).
The function is now activated. With v,
you can move directly to settings.
Changing previously set external
destination number
¢
¢
v
í
Room Monitor
s
Scroll to the
Press the display key.
§Edit§
X
Delete existing number.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 35).
¤
Save changes (page 47).
and enter des-
§Edit§
s (select hand-
§INT§
.
§OK§
.
§Save Entry§ §OK§
(Low
or High).
line.
Call to:
Changing previously set internal
destination number
¢
¢
v
í
Room Monitor
s
Scroll to the
Press the display key.
§Edit§
Press the display key to con-
§Yes§
firm the prompt.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 35).
¤
Save changes (page 47).
Deactivating the room monitor
remotely
Important: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Take the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings on the handset (e.g. no ring-
tone) will however remain activated until
you press the display key
set.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
(page 35) with
§Save§
Using several handsets
Call to:
line.
on the hand-
§Off§
.
35
Advertisement
Table of Contents
