Setting Display Illumination; Activating/Deactivating Auto Answer; Adjusting The Loudspeaker Volume; Changing Ringtones - Siemens Gigaset E450 User Manual

Setting display illumination

Depending on whether or not the handset
is in the charging cradle you can set differ-
ent levels of display illumination. If the
charging cradle is switched on, the display
is permanently dimmed.
¢ ¢
v Ð
Display
The current setting is displayed.
¤
Change multiple line input:
In Charger
Select or .
On Off
without Charger
Select or .
On Off
Press the display key.
§Save§
a
Press and hold (idle status).
Note:
When the display illumination is switched on,
the standby time of the handset is reduced to
approx. 30 hours.
Activating/deactivating
auto answer
If you have activated this function, when
you get a call you can simply lift the hand-
set out of the charging cradle without hav-
ing to press the talk key c.
¢ ¢
v Ð
Handset
Auto Answer
Select and press
a
Press and hold (idle status).
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree speaking to five different levels
and the earpiece volume to three different
levels. You can only make these adjust-
ments during an external call.
The handsfree volume can only be
adjusted when this function is set.
¢
Backlight
‰
( = on).
§OK§
You are conducting an external call.
t
Open menu.
r
Select volume.
Press display key if necessary
§Save§
to save the setting perma-
nently.
If t is assigned a different function,
e.g. when toggling (page 16):
Open menu.
§Options§
Volume Select and press
Configure setting (see above).

Changing ringtones

u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and
the "Crescendo" ring (6; volume
increases with each ring =
‰).
u
Ringtones:
You can choose between 15 different
melodies.
You can configure the following functions
with different ringtones:
u
: for external calls
Ext. Calls
u
: for internal calls
Internal Calls
u
All: the same for all functions
Settings for individual functions
Set the volume and melody depending on
the type of signalling required.
¢ ¢
v Ð
Audio Settings
Ringer Settings
q
Set, e.g. select
press
§OK§
¤
Change multiple line input:
r
Set volume (1–6).
s
Scroll to the next line.
r
Select melody.
Press the display key to save
§Save§
the setting.
Handset settings
.
§OK§
¢
Ext. Calls and
.
37