Connecting The System Controller To The Mini Remote/Mini Remote Dropbar - Bosch BDU314Y Owner's Manual

3. If you are handing in your eBike to a bicycle dealer
for maintenance, it is recommended that you tem-
porarily deactivate <eBike Lock>.
Software updates
Software updates must be started manually in the
eBike Flow app.
Connecting the System Controller to the Mini Remote/
The System Controller and Mini Remote/Mini Re-
mote Dropbar operating units are connected via
Bluetooth®.
Switch on the eBike without maneuvering it.
If the Mini Remote/Mini Remote Dropbar operating
unit has not already been connected to the System
Controller operating unit by the bicycle dealer, pro-
ceed as follows:
1. First connect your smartphone to the System
Controller operating unit via the eBike Flow app
(see Establishing a Smartphone Connection).
2. In the eBike Flow app, select <Connect the Mini
Remote>.
You will be asked to switch the System Controller
and Mini Remote/Mini Remote Dropbar to pair-
ing mode.
3. System Controller: Start the pairing process by
pressing and holding (3 s) the on/off button (12)
until the lower bar on battery charge indicator (13)
shows the pairing process by flashing blue.
4. Mini Remote/Mini Remote Dropbar: Start the
pairing process by pressing any button until the
pairing process is shown by the LED indicator light
(3) flashing blue.
5. Follow the instructions in the eBike Flow app.
If pairing is successful, this is shown within 30 s on
the Mini Remote/Mini Remote Dropbar operating
Bosch eBike Systems
Software updates are transferred from the app to the
operating unit in the background as soon as it is con-
nected to the app. During the update process, the
green flashing of the battery charge indicator of the
eBike battery (13) indicates the progress. The eBike
is then restarted.
You can control the software updates via the eBike
Flow app.
Mini Remote Dropbar
unit by the LED indicator light (3) flashing green three
times.
If the connection cannot be established, this is shown
by the LED indicator lamp (3) flashing red three
times. Repeat the connection process.
If you want to connect theMini Remote/Mini Remote
Dropbar operating unit to a System Controller on
another eBike, the following steps must be carried
out:
1. Mini Remote/Mini Remote Dropbar: Remove the
battery on the Mini Remote/Mini Remote Drop-
bar operating unit and reinsert it.
2. Within the next 10 s, press and hold the decrease
assistance –/walk assistance (6) button for 5 s.
The pairing process is shown by the LED indicator
light (3) flashing blue for 30 s.
3. System Controller: Start the pairing process by
pressing and holding (3 s) the on/off button (12)
until the lower bar on battery charge indicator (13)
shows the pairing process by flashing blue.
If pairing is successful, this is shown within 30 s on
the Mini Remote/Mini Remote Dropbar operating
unit by the LED indicator light (3) flashing green three
times.
If the connection cannot be established, this is shown
by the LED indicator lamp (3) flashing red three
times. Repeat the connection process.
English – 15
0 275 U07 3RC | (23.03.2023)