Bosch BDU314Y Owner's Manual page 347

English – 10
Bar
2 × orange
1 × orange
1 × red
1 × red flashing
If the eBike battery is being charged, the topmost bar
on the battery charge indicator of the eBike bat-
tery (3) flashes.
Outside of the eBike, the eBike battery's state of
charge is indicated by the LEDs on the eBike battery.
Selecting the assistance level
Using the "Reduce assistance" – (8) and "Increase as-
sistance" + (9) buttons on the operating unit, you can
set how much the drive assists you while pedaling.
The assistance level can be changed at any time, even
while cycling, and is displayed in color.
Level Notes
OFF The drive support is switched off. The
eBike can just be moved by pedaling, as
with a normal bicycle.
ECO Effective support with maximum effi-
ciency, for maximum range
TOUR Steady support, long range for touring
TOUR+ Dynamic support for normal riding and
biking sports
eMTB Optimal support whatever the terrain,
rapid acceleration when starting from a
standstill, improved dynamics and top
performance
SPORT Powerful assistance, for mountain biking
and for cycling in urban traffic
TURBO Maximum support even at a high cadence,
for sport cycling
AUTO The assistance is adapted dynamically to
the riding situation.
RACE Maximum support on the eMTB race
course; very direct response behavior and
maximum "extended boost" for the best
0 275 U07 3RL | (08.03.2023)
Capacity
30 % to 21 %
20 % to 11 %
10 % to reserve
Reserve to empty
Level Notes
possible performance in competitive situ-
ations
CARGO Steady, powerful support, to be able to
transport heavy weights
SPRINT Dynamic support depending on the ca-
dence – for sport-based eGravel and
eRoad riding with quick sprints and fre-
quent ascents
Note: The available modes are dependent on the re-
spective drive unit.
The designations and configuration of the assistance levels can
be preconfigured by the manufacturer and selected by the bicy-
cle retailer.
Adjusting the assistance level
The assistance levels can be adjusted within certain
parameters using the eBike Flow app. You therefore
have the option of adjusting your eBike to your per-
sonal requirements.
Creating a mode that is totally your own is not possi-
ble. You can only adjust the modes that have been en-
abled on your system by the manufacturer or the
dealer. This may even be fewer than 4 modes.
It may also be the case that a mode cannot be ad-
justed due to restrictions in your country.
The following parameters are available to you for ad-
justment:
– Support in relation to the basic value of the mode
(within the legal specifications)
– Response behavior of the drive
– Throttling down speed (within the legal specifica-
tions)
– Maximum torque (within the framework of the drive
limits)
Note: Please ensure that your changed mode retains
the position, name and color on all on-board comput-
ers and operating elements.
Interaction of the drive unit with the gear-
shifting
You should shift through gears on an eBike in the
same manner as when using a normal bicycle (ob-
Bosch eBike Systems