System settings
Assigning a ringer melody to an MSN
Each receive MSN is assigned a ringer melody during the setup process. You can change
this assignment for each receive MSN individually. You can choose one of the available
ringtone melodies for a receive MSN. This means that all handsets will use this ringer
melody to indicate an incoming call to a receive MSN.
In place of ringer melodies 1-20, you can also assign the "Device ringer"
i
to an MSN. The handsets assigned to the receive MSN will then use the
ringer melody set on the handset for external calls.
¢
v
w
Ð
/
s
MSN1:
v
s
Ringer Melody:
r
Ringer Melody: 5
Setting up call reject for the entire MSN group
You can reject an external call not only on your handset, but for all members of an MSN
group. Pressing
REJECT
entire group will no longer be called. A "waiting call" can also be rejected during a call.
The call is added to the caller list.
¢
v
w
Ð
/
s
Reject all
Diverting calls
Diverting calls internally
Only one destination can be selected for internal call diversion.
◆
Only one-level call diversion is supported: If the subscriber to whom
◆
i
you divert your calls has activated their own call diversion, this is no
longer effective. The diverted call will always ring at the subscriber
you diverted it to.
Setting up a destination
¢
v
w
Ð
/
s
INT11: Int.11
74
¢
¢
Base
Settings
Select MSN, e. g. MSN1: Anna.
Open the submenu.
Select and confirm.
OK
Select melody (1 – 10, Device ringer) and confirm,
OK
e. g. Ringer Melody: 5.
will give the caller a busy signal instead of a ringing tone. The
¢
¢
Base
Settings
Select and confirm. (‰ = activated)
OK
¢
¢
Base
Forward. base
Select internal number, e g. INT11: Int.11 (‰ = On).
OK
¢
¢
ISDN settings
¢
ISDN settings
¢
Forward. dest.
Set up MSN