Security Settings; Changing The System Pin; Defining Authorisations - Gigaset SL56 User Manual

Security settings

Changing the system PIN

You can protect the following settings against unauthorised access using the system PIN
(Personal Identification Number):
Call charges and settings
◆
Internal and external call diversion
◆
SMS service centres, subscriber configurations, security, ISDN and system settings
◆
Getting started wizard
◆
The system PIN will not work with the number 0000.
¢ ¢
v w Ð
/
~
OK
~
OK
!
Memorise the new system PIN! If you forget it, the device will require
technical intervention. If this happens, contact the Hotline (page 103).

Defining authorisations

You can set different authorisations for all registered devices:
◆
Unrestricted
All devices can answer incoming calls and make external/internal outgoing calls.
◆
Incoming only
The devices can only answer incoming external calls. External outgoing calls are not
possible. Internal calls (outgoing and incoming) are possible. Emergency numbers
can be dialled.
◆
Internal only
The devices can only be used for internal calls (incoming and outgoing). Emergency
numbers can be dialled.
¢ ¢
v w Ð
/
s
INT11: Int.11
Í
s
Internal only
¢ ¢
Base Settings
Enter new system PIN (up to 8 digits, 0 to 9)
and confirm.
Retype the new system PIN and confirm.
¢ ¢
Base Settings
Select the internal number, e. g., INT 11.Int.11
Press the display key to open the submenu.
Select authorisation, e. g. Internal only and con-
firm. The set authorisation is marked with ‰.
¢
Security Change PIN
¢
Security Authorisation
Security settings
65