Call Setup; Call Screening; Call Waiting - Siemens S75 User Manual

42 Setup

Call setup

¢ ¢
í T
Hide ID
If activated, your phone number will
not appear on the other party's dis-
play (depending on the service pro-
viders).

Call waiting

If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Divert
You can specify when calls should be
diverted to your mailbox or other
phone numbers.
Setting up call divert (example)
Unanswered
Select Unanswered. (In-
I cludes the conditions
Not reachable,
Busy, see below.)
Confirm and select Set,
C then enter the phone
number to which the call
is to be diverted.
Confirm. The setting is
C confirmed by the
network.
Call setup
No reply,
All calls
All calls are diverted.
Ç
b
Other possibilities for divert:
Not reachable,
fax, Receiving data

Call screening

b
Only calls from phone numbers that
are in the Phonebook/Addressbook
or in a group are signalled audibly.
Other calls are only displayed.
Any key answer
Incoming calls can be accepted by
pressing any key (except for
Minute beep
During the call, you (and only you)
b
will hear a beep after each minute as
a reminder of the time elapsed.
Symbol in the top line of
display in standby mode.
No reply, Busy,
b
Receiving
).
A