Table of Contents
Advertisement
Getting started
The phone is packaged in dismantled
form and must be re-assembled prior
to using for the first time.
In rare cases, static discharge may
cause discolouration at the edges of
the display. However, this will disap-
pear within approx. 10 minutes.
Inserting SIM card/
battery
The service provider supplies you with
a SIM card on which all the important
data for your line is stored. If the SIM
card has been delivered in credit-card
size, snap the smaller segment out
and remove any rough edges.
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards. Then push the
SIM card gently inwards
sure that the chamfered corner is
in the correct position). Please do
not use any tools, when removing
the SIM card.
Your phone's dis-
play is supplied
with a protective
film. Remove this
film slowly before
assembling the
phone.
1
(en-
Getting started
• Insert the battery sideways into
2
the phone
3
downwards
into position.
3
• To remove the battery, pull it out
with the retaining tab on the side.
1
, then press it
until it clicks
2
7
Advertisement
Table of Contents
