Start the required communication pro-
gram on your PC and select the function
on the phone during the call (the PC will
take over the connection).
The call is signalled by a special ringtone
and the type of call (fax or data) is dis-
played. Now start the communication
program in your PC to receive the fax/
Auto key lock
If activated, the keypad is locked auto-
matically if no key has been pressed for
one minute in standby mode. This pre-
vents the phone from being used acci-
dentally. However, you can still be called
and you can still make an emergency call.
Press and hold
pad in standby mode.
Only one phone number can be dialled.
The required phone code (4 to 8 digits) is
set by you and entered at the first security
To switch off, press and hold , then enter
the telephone code.
Restrict calls to SIM-protected numbers in
Description, see p. 11:
This SIM only
Your phone is prevented from being used
with a different SIM card.
to block/unblockthe key-
Network barring restricts the use of your
All outgoing calls except emergency num-
bers are barred.
Only national calls can be made.
(International outgoing without home country)
No international calls, only calls to the
The phone is barred for all incoming calls.
You will not receive calls when outside
your home network.
Status check for network barring
Clear all barrings.
Two independent phone numbers must be
The list of GSM networks currently availa-
ble is displayed.
Network search is restarted.
If activated, the next network is dialled in
the order of your "preferred networks".
Set the service providers you prefer when
you leave your home network.