Highlight one or more entries in order to
perform a function on it/them.
to highlight or delete
to highlight a non-highlighted
to remove the highlighting
from a highlighted entry.
Additional highlighting functions:
to open menu.
Highlight all entries.
Delete highlighting on all
All selected entries are deleted.
The phone and SIM card are protected
against misuse by several security codes.
Keep these confidential numbers in a safe
place where you can access them again if
Protects your SIM card (personal
This is needed to set the charge de-
tail display and to access additional
functions on special SIM cards.
Key code. Used to unlock SIM cards
after the wrong PIN has been en-
Protects your phone. Must be en-
tered at the first security setting.
and select entry/en-
The PIN is usually requested each time
the phone is switched on. You can deacti-
vate this feature but you risk unauthor-
ised use of the phone. Some service pro-
viders do not permit deactivating the
. Enter PIN and confirm
You can change the PIN to any 4- to 8-dig-
it number you find easier to remember.
. Enter current PIN and confirm
. Enter new PIN twice and confirm
each time with
(Display only if PIN2 is available)
Proceed as with
(Change phone code)
You define the phone code (4–8 digits)
when you call up a phone-code protected
function for the first time (e.g.
p. 28). It is then valid for all phone-code
Following the third unsuccessful attempt,
access to the phone code and the func-
tions that use it is denied. If this occurs,
contact the Siemens Service (p. 36).
Clearing SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter the
PUK (MASTER PIN) provided by your serv-
ice provider with the SIM card in accord-
ance with the instructions. If the PUK
(MASTER PIN) has been lost, please con-
tact your service provider.