Table of Contents
Advertisement
Danger of burns!
during rinsing, a little hot water flows from the coffee spouts.
avoid contact with splashes of water.
To turn the appliance off, press the
appliance performs a rinse cycle.
Please note:
if the appliance is not used for an extended period, place the
main switch in the 0 position (fig. 6).
Important!
To avoid damaging the appliance, never place the main switch
(fig. 6) in the 0 position while the appliance is on.
IMPOSTARE l'AUTOSPEGNIMENTO (STAND
BY)
The appliance is set by default to go off if not used for two
hours.
The time can be changed so that the appliance switches off
after 15 or 30 minutes, or after 1, 2 or 3 hours.
1. With the appliance in stand-by (the main switch has to be
turned to i position) (fig. 3), Press and hold the eCo button
until the lights at the back of the control panel come on
(see fig. after step 2).
2. Select the required period of time (15 or 30 minutes or 1,
2 or 3 hours) by pressing the
time table).
15min
30min
3. Press the ECO button to confirm the selection: auto-off is
programmed.
Please note:
To disconnect the appliance completely, place the main switch
at the back of the appliance in the 0 position (fig. 6).
ENERGY SAVING
use this function to enable or disable energy saving mode. en- en-
ergy saving mode reduces energy consumption in compliance
with current european regulations.
To activate or deactivate this mode, press the ECO button. after
a period of inactivity, if eCo mode is active the ECO button light
comes on.
This mode is active by default.
Please note:
button (fig. 4). The
button (see the light/
1h
2h
3h
a few seconds may elapse between energy saving mode and
delivery of the first coffee.
MAKING COFFEE
Selecting the coffee taste
Turn the dial (B8) to select the required taste. Turning it clock-
(B8) to select the required taste. Turning it clock-
wise increases the quantity of coffee beans the appliance will
grind and therefore the strength of the coffee obtained.
Please note :
•
The first time you use the appliance, you will need to
make a number of coffees to identify the correct dial posi-
tion through trial and error.
•
Make sure not to turn the dial too far clockwise, otherwise
the coffee may be delivered too slowly (a drop at a time),
particularly when making two cups of coffee.
Selecting the quantity of coffee in the cup
Select the required quantity of coffee (B9) by turning the dial:
.
Turning it clockwise increases the amount of coffee obtained.
Please note :
The first time you use the appliance, you will need to make a
number of coffees to identify the correct dial position through
trial and error.
Adjusting the coffee mill
The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
however, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (fig. 7).
Please note :
The grinding adjustment dial must only be turned when the
10
to select the required taste. Turning it clock-
. Turning it clock-
Turning it clock-
Advertisement
Table of Contents
Troubleshooting
