Advertisement
Input voltage frequency is too
18
high
Input voltage frequency is too
19
low
30
Short circuit
31
Compressor start-up error
32
Compressor operation error
33
High appliance temperature
34
Low appliance temperature
35
Overvoltage
36
Undervoltage
37
Exhaust
38
Front fan error
39
Rear fan error
40
Fluorine shortage
41
Overload
Motor board communications
50
error
Power board communications
51
error
52
WiFi communications error
53
Temperature sensor error
If the problem persists, please contact Ecoflow after-sales service.
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes, then try to restart the unit by only charging with the AC charging cable;
• Check if firmware updates are available, and upgrade to the latest version.
• Turn off all the power supplies (including the battery pack), let the unit stand for 5
minutes, and then try to restart the unit;
• Check if firmware updates are available, and upgrade to the latest version.
• Turn off all the power supplies (including the battery pack), let the unit stand in a cool
place for 5 minutes, and then try to restart the unit;
• Check if firmware updates are available, and upgrade to the latest version.
• Turn off all the power supplies (including the battery pack), let the unit stand at room
temperature for 5 minutes, and then try to restart the unit;
• Check if firmware updates are available, and upgrade to the latest version.
• Turn off all the power supplies (including the battery pack), check if the air outlets are
obstructed and remove the obstructions, let the unit stand for 5 minutes, and then try
to restart the unit;
• Turn off all the power supplies (including the battery pack), and try to restart the unit;
• Check if firmware updates are available, and upgrade to the latest version.
• Turn off all the power supplies (including the battery pack), let the unit stand in a cool
place for 5 minutes, and then try to restart the unit;
• Check if the front and rear air outlets are obstructed and remove any obstructions;
• Check if firmware updates are available, and upgrade to the latest version.
• Turn off all the power supplies (including the battery pack), and try to restart the unit;
• Check if firmware updates are available, and upgrade to the latest version.
Advertisement
