Listening To Radio Broadcasts - Sherwood RD-6105 User Manual

LISTENING
Auto tuning
Select the tuner.
1
Select the tuning mode.
3
• Each time this button is pressed, the mode changes
as follows;
Tuning mode : "PRESET" goes off.
Preset mode : "PRESET" lights up.
Manual tuning
• Manual tuning is useful when you already know the frequency of
the desired station.
• Perform the steps 1 to 3 in "Auto tuning" procedure and press the
TUNING/PRESET UP( ) or DOWN( ) button repeatedly until
the right frequency has been reached.
Presetting radio stations
• You can store up to 30 preferred stations in the
memory.
Tune in the desired station with auto or
manual tuning.
1
TO RADIO
• Each time this button is pressed, the band is changed
to FM or AM.
• When pressing the BAND button without selecting
the TUNER, the tuner will be selected automatically.
• The tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and "TUNED".
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
• "MEM" is flickering for 5 seconds.
2 0
Select the desired band.
2
Press the TUNING/PRESET UP( ) or
DOWN( ) button for more than 0.5
4
second.
Press the MEMORY/ENTER button.
2