Recording - Sherwood RD-6105 User Manual

RECORDING

• The analog signals from the 6 CH DIRECT inputs as well as the digital signals from the coaxial or optical digital
input can be heard but cannot be recorded.
• The volume and tone (bass, treble) settings have no effect on the recording signals.
Recording with TAPE MONITOR
Select the desired input as a recording
source except for TAPE MONITOR.
1
• Be sure that "TAPE M" goes off.
Dubbing from video components onto
VIDEO 1
Select VIDEO 2 or VIDEO 3 as a recording
source.
1
Dubbing the audio and video signals
separately onto VIDEO 1
Example) When dubbing the VIDEO 2 video signal
and the CD audio signal separately onto
VIDEO 1.
Select VIDEO 2 as a video recording source.
1
Start recording on the TAPE MONITOR.
2
Start play on the desired input.
3
• For tape monitor function, refer to "TAPE
MONITOR function" on page 10.
Start recording on the VIDEO 1.
2
Start play on the VIDEO 2 or the VIDEO 3.
3
• The audio and video signals from the VIDEO 2 or the
VIDEO 3 will be dubbed onto the VIDEO 1 and you
can enjoy them on the TV set and from the speakers.
Select CD as an audio recording source.
2
2 2