Sharp Zaurus SL-5500 Software Manual page 39

• Inserting and Deleting in formulas
Reference errors appear when rows or columns are deleted and a deleted cell is
included in a formula.
For example: '=B1+C1' is entered in a cell. If cell B1 is deleted or the whole
column is deleted, a reference error will appear in cell A1. The result value of
the cell will be '200'. However as '=SUM(B2:C2)' is entered in cell A2, even if
column B is deleted, only the values of cells A2 and B2 are excluded. The
result of '=SUM(B2:B2)', (with cell C2 moved to the location of cell B2) is still
calculated. This indicates that it is preferable to use areas and functions,
rather than using a cell addressed directly with operators.
Reference
When the formula is entered incorrectly, HancomMobileSheet indicates
an error message. The error starts with '#' and the type of error is
indicated by the following letter code.
Types
This appears when the cell width is too small to accomodate all
#### of the data. The width can be extended by double-tapping on
the border of the column head.
This will appear when you use unregistered cell or area as
#NAME?
registered one.
#CALC When it is impossible to show the result.
#REFF When a cell related to a formula is being deleted.
#OPRND This appears when input data type is wrong.
#0DIV When the value is divided by 0.
#NUM When using an invalid numeric argument in a function.
When using an unsorted data in functions same as LOOKUP,
#N/A
VLOOKUP, HLOOKUP, and MATCH.
• Formula Copy and Move
It is not necessary to enter the same formulas or functions all over again when
the same formulas need to be applied to other cells. Simply enter one formula
and copy it into other cells.
CHAPTER 3:
HancomMobileSheet
Meaning
39