Sharp Zaurus SL-5500 Software Manual page 34

34 CHAPTER 3:
you must indicate AM or PM and it must be preceded by a space after the
time.
Reference
1. Dates are stored as a numeric offset in days from January 1, 1900.
So the date 1900/1/10 would internally store the value 10. This
means that if you enter a numeric value into a cell that is
designated as a date, that value will be applied to the date and
converted to a date value. The same is true for time, everything is
an offset from midnight which starts at 0
2. The results of these appear as the same contents entered on the
screen. However the format of the contents in the cell and the
contents in the inputbar are different. In HancomMobileSheet dates
follow the format of 96/10/1, and only this format appears in the
inputbar.
• Division of Input Contents and Screen Display
Same as displaying dates, sometimes the contents entered in a cell and in
the inputbar may appear differently. This format can be designated according
to your preferences.
(1) Commas can be set without direct input.
(2) When the figure of the number becomes too large, the numbers are indicated
in exponential format.
(3) When a formula or number with a set format is entered into a cell and ######
appears, this means that the width is too small. The width can be extended by
dragging the border of the column head.
(4) When there is an error in a cell, the number sign # will appear as indicated.
#0DIV, #CALC, #OPRND, #REFF, #NAME?, and etc all refer to formulas or
formats with errors.
(5) In standard formats when the cell width cannot be accommodated, ### will
appear. When there are too many letters compared to the cell width the
contents are shown to be shifted to the right cell. However, if there is data in
the right cell the contents exceeding the cell appear.
HancomMobileSheet