Paragraph - Sharp Zaurus SL-5500 Software Manual

You can select Bold, Italic and Underline
by tapping on the check box with the
Stylus. To cancel the selection, tap the
check box again.
If you select a font type, the preview
window allows you to preview the results.

Paragraph

To start a new paragraph in Hancom-
MobileWord, simply press the Enter key.
Paragraphs may be altered by using
[Format-Paragraph] which enables you to
group paragraphs into large bodies as well
as bullets as used in outlines. Also, you
can select line spacing and paragraph
numbering.
- Paragraph Formats : Paragraph formats
are only applied to individual paragraph
units. Therefore, if the cursor is placed
anywhere in a paragraph, the changes
will only be applied to the paragraph where the cursor is located.
Paragraphs that come before and after the paragraph with the cursor will
not be affected by the changes made. If the user wants to apply the
changes to multiple paragraphs simultaneously, the desired paragraphs
should be selected and changed accordingly.
- Form Toolbar : Paragraphs can be aligned easily from the Form Toolbar
instead of a dialog box.
CHAPTER 2:
HancomMobileWord
21