Page 1
Vacuum Cleaner User Manual VCO 20713 WV EN TH 01M-8864183200-4817-01...
Page 2
Please read this user manual first! Dear Customer, Thank you for preferring a Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
CONTENTS 1 Important safety and environmental instructions 4-5 1.1 General safety ......4 1.2 Compliance with WEEE Directive and Disposing of the Waste Product .
Important safety and environmental instructions This section contains safety • Your mains power supply should instructions that will help protect comply with the information from risk of personal injury or supplied on the rating plate of property damage. the appliance. Failure follow these...
Important safety and environmental instructions • Never use the appliance 1.2 Compliance with WEEE Directive and Disposing of the in or near to combustible Waste Product or inflammable places and This product complies with EU WEEE materials. Directive (19/2012/EU). This product •...
Usage 3.1 Intended use 3.5 Adjusting the parquet/car- pet brush The appliance has been designed for household By pressing the adjustment latch located on the use and is not suitable for industrial use. parquet carpet brush (6); 3.2 Attaching/removing the •...
Usage 3.7 Accessories 3.8 Switching off the vacuum cleaner and parking feature Crevice tool 1. Switch off the appliance with the on/off button (4) and unplug it. Suitable for cleaning surfaces 2. Press the cord winding button (12) to rewind difficult to clean, such as areas the power cord.
Cleaning and care Switch off and unplug the appliance before 6. Remove the HEPA filter and motor protection cleaning it. filter found at the back of the dust container (9). 7. After washing the sponge protection filter WARNING: Never use gasoline, under running water, wring it out slightly and solvent, abrasive cleaning agents, leave it to dry (for 24 hours minimum).