Advertisement
Quick Links
STEALTH
STL110LED/277 Installation Manual
Specifications:
Switching Capacity:
Detection Pattern:
Time Adjustment:
Power Consumption:
Surge Protection:
UL Listing:
SUITABLE FOR WET LOCATIONS
8 amps
Voltage:
277 volts
300W watts LED
50' x 1000
5 seconds to 12 minutes
1 watt
I.E.C. specs
Raintight Photoelectric Switch
STL110LED/277
Advertisement
Related Manuals for RAB Lighting STEALTH 110
Summary of Contents for RAB Lighting STEALTH 110
- Page 1 STEALTH STL110LED/277 Installation Manual STL110LED/277 Specifications: Switching Capacity: 8 amps Voltage: 277 volts 300W watts LED Detection Pattern: 50’ x 1000 Time Adjustment: 5 seconds to 12 minutes Power Consumption: 1 watt Surge Protection: I.E.C. specs UL Listing: Raintight Photoelectric Switch SUITABLE FOR WET LOCATIONS...
- Page 2 CAUTIONS: How does the STEALTH work? STEALTH’s infrared sensor “sees” small temperature changes caused by the TURN OFF ALL POWER AT CIRCUIT BREAKER/FUSE PANEL. motion of people or cars within its protection zone and turns on lights auto- matically. It welcomes visitors and may deter intruders. •...
-
Page 3: Choosing A Location
Choosing a Location Wiring Diagrams Basic Wiring Diagram Multiple Fixtures • Choose a location so that the sensor can “see” all paths of movement. • The sensor may be wall or ceiling mounted. • As distance from the sensor increases, it takes more movement to be detected. - Page 4 Aiming and Walk Testing Technical Tips: Lights Turn On for Unknown Reasons Walk Test: 1. Lights may turn on occasionally 3. You may not be aware of animals 3. Adjust the sensor aiming as during rain, snow and windstorms triggering the sensor. Create an The purpose of the Walk Test is because the sensor detects “Animal Alley”...
- Page 5 Technical Tips: Technical Tips: Lights Do Not Turn Off Lights Turn On and Off Incorrectly 1. Make sure the sensor is not in 3. Make sure sensor and lights are 1. Make sure the sensor is installed 6. Make sure sensor is not aimed Manual Override Mode.
- Page 6 Technical Tips: Technical Tips: Lights Do Not Turn On Lights Turn Off Too Quickly Range Appears Limited 1. Check that lamps and fixtures 1. Check if the sensor is being 3. Check that movement is not 1. Check that the sensor is level work.
-
Page 7: Limited Warranty
Label date of original purchase. $30.00 (made out to RAB Lighting). • Wire Nuts (3) We will repair or replace your unit. For repair or replacement, return the...