TABLE OF CONTENTS
INTRODUCTION .................................................................................... 2
BEFORE USE ......................................................................................... 3
GETTING STARTED ............................................................................... 4
APPENDIX ............................................................................................ 35
BEFORE USE
Using the Organizer for the first time
Be sure to perform the following procedures before using the Organizer
for the first time.
1. Open the Organizer.
2. Initialize the Organizer.
While holding
, press the RESET switch. Release the RESET
ON
switch and then release
ON
ON
NOTE:
Under certain conditions the message may appear as "Data
has been impaired! Press [Y] to CLEAR ALL memory". Proceed to the
next step in either case.
3. Press
.
Y
The Organizer is initialized and the TEL1 directory is displayed.
. The following display will appear:
CLEAR ALL DATA
OK ( Y/N ) ?
3